I may have a solution for you, but the # PLR636-SS is not available in black; it's only available in steel or a polished stainless steel. However, if you wanted to apply a durable Plasti-Dip type spray-on coating to the handle before installing it on your coach, it would stand up a bit better than a paint would, while giving you the look you're seeking.
If you're looking for something with a little less modification involved, the Assist Handle w/ Padded Grip for RV Entry Door - Black #... view full answer...
In order to determine which steering stabilizer is the correct fit for your 2018 Coachmen Mirada you will need to know the GVWR on your coach; the correct steering stabilizer is determined based on the GVWR.
For example, if your Mirada has a GVWR of 24000 or 26000-lbs you will want to use the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK25-RSSA. If your GVWR is between 16000-lbs and 22000-lbs you'll want to use the # RM-RBK22-RSSA.
I've... view full answer...
Sounds like the motor is bad then if the module and wiring is good. If the steps you have are the Lippert Tread Lites like part # LC353543 that you referenced the correct replacement motor would then be the # LC183058. If you have something else let me know and I'll see what you'd need. view full answer...
The factory brake controller port for your 2019 Coachmen Mirada that's built on the Ford F-53 should be located on the left hand side of the steering column support, which is near the emergency brake pedal. I have attached an image that gives a clearer view of this.
The Plug-In Adapter # 3035-P that you referenced is the correct harness to allow for a plug-and-play install using this port with a Tekonsha brake controller like the Prodigy P2 # 90885 (great choice) that you were looking at. view full answer...
I do have an option for you but there aren't any upgraded bolt-on trailer hitch options for a 2013 Coachmen Mirada Motorhome. If you wish to replace the hitch that is installed currently, you'll have to use a universal one such as the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-07. That said, the installation of this hitch requires welding or drilling and bolting. view full answer...
From what I could find on your 2017 Coachmen Mirada 35BH, it uses a Ford chassis. The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes # RM42RR will work for your 2017 Coachmen Mirada on a Ford Chassis.
The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes # RM42RR uses the Custom Mounting Brackets for Roadmaster Reflex Steering Stabilizer # RM-RBK22 which are confirmed to fit the Ford chassis used for motorhomes.... view full answer...
What you're looking for is the Replacement Door Switch for Lippert Electric Coach Step # LC301694. This will replace your existing sensor so the steps will automatically extend and retract when you open and close the door. view full answer...
I may have a solution for you, but I don't have a way to determine what locks are compatible with a 2014 Coachmen Mirada, so you would need to measure your cutout dimensions. However, the Global Link Ultra E Pro Electronic Lock for Travel Trailer w Keyed Alike Option - Black - Left Hand # 295-000185 or # 295-000183 (right hand) are an electronic lock for travel trailers and RVs that fits in 3-3/4" tall x 2-3/4" wide cutouts. If you have that size cutout on your door, then this option would... view full answer...
We do have plenty of replacement lenses that may work great for you, however in order to determine the correct replacement lens we would need to know how big of a lens you need first.
If you're able to provide an accurate length and width for the lens you need we'd be happy to help you.
I have also attached a link of all our exterior lights for you to check out as well. view full answer...
Your 2014 Coachmen Mirada on the Ford F53 chassis will use the Front # SSF-170-40-2 and Rear # SSR-180-54-1 SumoSprings helper springs.
If you do not already have a steering stabilizer I recommend installing the Roadmaster Exact Center Steering Stabilizer # RM42RR when you install the SumoSprings. This will help improve steering feel and keep the wheel centered on long trips. view full answer...
I am not sure what unit you currently have in your 2005 Coachmen Mirada but any replacement water heater like the Atwood RV Water Heater # AT96121 you referenced should be installed by a qualified installer, service agency, or gas supplier. They should be able to install it properly with your current harness.
If you check out the linked installation video you can see a sample installation on a 1994 Firan Covington. Our installer had to take note of the existing wiring and match it up with... view full answer...
Your 2011 Coachmen Mirada has what they call a double din fit. I recommend the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth, jControl - 12V # JWM60A. The overall dimensions are 10-7/16" wide x 7" tall x 6-1/2" deep with mounting dimensions of 9" wide x 6" tall x 5-1/2" deep.
If that is too large for your cab I've attached the link to all our double din options as well as a link our in-cab options. Each option will have the dimensions to help you confirm your desired fit on the... view full answer...
From what I have found, there is only one rear kit that fits the Ford F-53 Chassis used on your 2005 Coachmen Mirada Motorhome. That kit is the # F2170. The FSN-21-9015 number you provided is actually the part number to the sticker on your Firestone Ride-Rite Helper Springs, and not the model number of the helper spring kit itself.
We do have the upper bracket for the # F2170. What you need is the Replacement Upper Bracket for Firestone Ride-Rite Air Helper Springs Kit - Qty 1 # F5216. view full answer...
If you are looking to replace your current baggage door lock cylinders you can certainly do that with the Global Link Replacement Cam Lock Cylinder for RVs; you will just need to ensure you get the correct length replacement by measuring the threaded portion of your lock cylinder.
- 7/8" Long: Replacement Cam Lock Cylinder # 295-000003
- 1-1/8" Long: Replacement Cam Lock Cylinder # 295-000004
- 1-3/8" Long: Replacement Cam Lock Cylinder # 295-000005
- 1-3/4" Long: Replacement Cam Lock... view full answer...
Small individual parts for an older Kwikee step motor like the one on your 1996 Coachmen are no longer available. For a Series 28 electric single step on a 1996 Coachman you'll need to upgrade the unit to current parts, according to my contact at Lippert.
If your step linkage is curved use kit Conversion/Upgrade Kit # LC379145. If the step linkage is straight then use kit # LC379769. Please compare the photos of these items to your unit to determine the correct upgrade kit. view full answer...
The Roadmaster front anti-sway bar is an excellent option for added stability for your customer's motorhome, and you were correct about the fit for a 2007 Coachmen Mirada with a 20,500 lb GVWR, which is the following:
- Roadmaster Front Anti-Sway Bar # RM-1139-148
This stabilizer is going to do a superb job of helping brace the axle on the motorhome, resulting in more controlled handling and making it easier to steer your Coachmen. In regards to installation, it should take somewhere... view full answer...
For your 2016 Coachmen Mirada, the replacement parts are:
Motor-- Replacement Motor for Lippert Electric Coach Step # LC301695
Controller-- Replacement Control Module for Lippert Electric Coach Step # LC301702
Switch-- Replacement Door Switch for Lippert Electric Coach Step # LC301694 view full answer...
Do you know what brand of camera you have now? I would need to know that for sure to pick out the correct camera replacement. I believe you have an RVS brand system now on your 2017 Coachman Mirada 35LS so for a replacement for that you could use the part # RVS-812N. view full answer...
Most brake controllers such as the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 come with a wiring harness that has blunt cut wires on one end and a plug on the other end that goes to the controller. You will need to attach the blunt cut wires on the above harness to the blunt cut wires on your motorhome via butt connectors in order to install a brake controller. There is not a plug-in connector that installs on the end of the motorhome's blunt cut wires and then plugs into... view full answer...
I looked up your 2015 Coachmen Mirada that's built on a Ford F-53 chassis and it's a 34BH model which means the correct front SumoSprings kit is the part # SSF-170-40-2. The correct rear kit then is the part # SSR-180-54-1. view full answer...
Go To Results